1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

changing rear diff seal

Discussion in 'Early CJ5 and CJ6 Tech' started by ron1, Nov 22, 2008.

  1. Nov 22, 2008
    ron1

    ron1 New Member

    Joined:
    Nov 22, 2008
    Messages:
    8
    1964 cj5 f134 rear diff seal changing is there a crush sleeve or just tighten to what torque
     
    ron1, Nov 22, 2008
    #1
  2. Nov 22, 2008
    Brian P

    Brian P Member

    Clarkdale Arizona
    Joined:
    Nov 24, 2007
    Messages:
    650
    There is no crush sleeve, Bearing preload is set with shim packs, The yoke will tighten up directly on the slinger and inner bearing race.........The FSM I have shows pinion nut should be torqued 200 to 220 foot pounds.
     
    Brian P, Nov 22, 2008
    #2
  3. Nov 22, 2008
    ron1

    ron1 New Member

    Joined:
    Nov 22, 2008
    Messages:
    8
    thanks brian for the info
     
    ron1, Nov 22, 2008
    #3
  4. Nov 23, 2008
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,362
    Use new nut.
     
    scott milliner, Nov 23, 2008
    #4
New Posts