1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Quick electrical question

Discussion in 'Flat Fender Tech' started by chillyred87, Oct 23, 2008.

  1. Oct 23, 2008
    chillyred87

    chillyred87 New Member

    Joined:
    Oct 15, 2008
    Messages:
    2
    In an m38 im looking to replacing all the gauges on a 24 volt system. Does anyone know if there is a way to make gauges for a 12 volt system work correctly on 24v system. Or am i going to have to have to wire them all into a reducer like Don X did i believe to run 12 volt accesories such as cb's. Thanks for any help-Dave:?
     
    chillyred87, Oct 23, 2008
    #1
  2. Oct 23, 2008
    Bill F

    Bill F Finally running

    Hillsboro NH
    Joined:
    Sep 22, 2002
    Messages:
    588
    If you go to willysmjeeps.com they can help you there. Are your 24 volt guages in tough shape?
     
    Bill F, Oct 23, 2008
    #2
  3. Oct 23, 2008
    chillyred87

    chillyred87 New Member

    Joined:
    Oct 15, 2008
    Messages:
    2
    Bill thanks for the website. More of the forum i was looking for. Some gauges are mising and the rest are already sold. Thanks for the help-Dave
     
    chillyred87, Oct 23, 2008
    #3
  4. Oct 23, 2008
    Bill F

    Bill F Finally running

    Hillsboro NH
    Joined:
    Sep 22, 2002
    Messages:
    588
    I would think it best to try to find some 24volt stuff if you are going to keep the jeep 24volt.
     
    Bill F, Oct 23, 2008
    #4
New Posts