1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Gas pedal

Discussion in 'Early CJ5 and CJ6 Tech' started by gross3049, Oct 11, 2008.

  1. Oct 11, 2008
    gross3049

    gross3049 New Member

    Brewer Maine
    Joined:
    Apr 19, 2007
    Messages:
    19
    Hello folks
    So today took the Old Jeep out for a ride.
    The spring that makes the gas pedal work, broke.
    I rigged it to get home, but I can not see were it hooked up.
    Does anyone know and a pic would be great.
    Thanks so much
    Jason
    1955 CJ 5 :)
     
    gross3049, Oct 11, 2008
    #1
  2. Oct 11, 2008
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,192
    If its an f-head, there's a pivot point on the end of the pedal rod. Mounted to the side cover stud on the firewall end.This pivot transfers the movement vertically. There should be hole in it for the spring, it will go from there downward to a plug in the block with a hole drilled thru the head of it, Spring goes between the two.
     
    SIDSCJ, Oct 11, 2008
    #2
  3. Oct 11, 2008
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,192
    SIDSCJ, Oct 11, 2008
    #3
  4. Oct 12, 2008
    gross3049

    gross3049 New Member

    Brewer Maine
    Joined:
    Apr 19, 2007
    Messages:
    19
    Thanks so much
    Now I know
    Jason:)
     
    gross3049, Oct 12, 2008
    #4
New Posts