1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

steering conversion

Discussion in 'Early CJ5 and CJ6 Tech' started by jeep peep69, Sep 21, 2008.

  1. jeep peep69

    jeep peep69 Member

    would a tilt coloum and steering box out of a 1967 jeep wagoneer be a good a good choice for a sagnaw conversion into a cj5?
     
    jeep peep69, Sep 21, 2008
    #1
  2. groomer_guy

    groomer_guy Member

    I have the tilt column out of a waggy. The box is not however. It was from a CJ5. Saginaw though. Just had to use 2 hose clamps to hold the directional switch on. The diameter is larger than the stock one. Works ok though.
     
    groomer_guy, Sep 21, 2008
    #2
  3. jeep peep69

    jeep peep69 Member

    thank you i found one today and it looked like it would work with a little fab work i will go pick it up on monday i just wanted to hear if any one else had used this type of set up first
     
    jeep peep69, Sep 21, 2008
    #3