1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

MC Floor Cover

Discussion in 'Flat Fender Tech' started by DanStew, Sep 21, 2008.

  1. Sep 21, 2008
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    Can somebody get me some measurements for th ecover that you remove to add fluid to the MC? Also can i get some measurements on the floor pan where to cutout the hole to mount the cover. The PO decided they didnt want to make an access point to get to the MC so it is kind of hard to see if i have fluid to stop with. So i have to make a cover.

    Thanks
     
    DanStew, Sep 21, 2008
    #1
  2. Sep 21, 2008
    sammy

    sammy Coca-Cola?

    Albuquerque, NM
    Joined:
    Jul 1, 2007
    Messages:
    1,577
    Sure, gimme a sec Dan, mine's off anyway right now
     
    sammy, Sep 21, 2008
    #2
  3. Sep 21, 2008
    sammy

    sammy Coca-Cola?

    Albuquerque, NM
    Joined:
    Jul 1, 2007
    Messages:
    1,577
    K, these are as good as I can get as the toeboard slants to one side, I drew them and double checked, and it seems to line up. The flat of the cover corresponds with the bump for the pedal. The I gave you measuements of the cap itself which has a bump in it, and then the location of the 4" hole in the toeboard.


    Should add to 110% or 4/5's R)
    [​IMG]
    [​IMG]
     
    sammy, Sep 21, 2008
    #3
  4. Sep 21, 2008
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,197
    Can you not see the flattie MC from the top?

    I've been able to check SSDutch from the top with a light, and fill brake fluid in an old-fashioned hand-pump oil can (think Wizard of Oz).
     
    Boyink, Sep 21, 2008
    #4
  5. Sep 27, 2008
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    R)R)R) got one of those too:D dan i got some extra covers ifin you needs one;)
     
    kaiser_willys, Sep 27, 2008
    #5
New Posts