1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

transmision floor panel

Discussion in 'Early CJ5 and CJ6 Tech' started by 68 swamper, Sep 7, 2008.

  1. Sep 7, 2008
    68 swamper

    68 swamper New Member

    Slidell , Louisiana
    Joined:
    Feb 26, 2006
    Messages:
    29
    Hi guys.
    been doing some floor repais on th 1968 cj, I removed the transmision panel thinking I could add some new steel to it but Its hard to weld to rust,so it looks like I will have to replace. any recomendations on where I can purchase the panel??
     
    68 swamper, Sep 7, 2008
    #1
  2. Sep 7, 2008
    68 swamper

    68 swamper New Member

    Slidell , Louisiana
    Joined:
    Feb 26, 2006
    Messages:
    29
    forgot the pics
     
    68 swamper, Sep 7, 2008
    #2
  3. Sep 7, 2008
    BenFoley

    BenFoley Member

    Cedar Rapids, IA
    Joined:
    May 22, 2008
    Messages:
    130
    I would suggest calling Harry and Jo Sheets @ Midwest Willys, they have some pretty solid one for $35(?) if I remember right. Good Luck.

    Harry & Jo Sheets
    3708 S. 100 E.
    Crawfordsville, IN 47933
    (765) 362-2247
    email: josheets@tctc.com

    :v6:BenF
     
    BenFoley, Sep 7, 2008
    #3
  4. Sep 7, 2008
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Midwest Willys is a good suggestion - you should be able to find a used one. I'd expect they are available aftermarket, but I'd prefer a good used one.
     
    timgr, Sep 7, 2008
    #4
  5. Sep 7, 2008
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,192
    Aftermarket won't fit the existing holes in the floor.Not even close. BTDT! Buy a good used one if you can, trust me on this.
     
    SIDSCJ, Sep 7, 2008
    #5
New Posts