1976 CJ5 Proportioning Valve

After an exhaustive search, i cant find the answer to what is probably a simple question...

i recently bought all new rigid lines for my beast and wehn i went to replace the lines from th MC to the PV... the fittings were different sizes...

i know i can get the tube modified to fit the existing PV but i am curious... should i replace the PV or assume that its still good... it appears to be original and its not leaking, but since i am doing the ENTIRE brrake system, i tthought i would look to see if anyone out there knows where i can get a replacement... i have looked all over my area (ATL,GA) but cant find one...

one more probably obvious question...

is it going to be easier to R/R the brake lines with the tub off?

its going to get cold here in the next few months and i REALLY want to take her out for another spin before its too cold to go toppless (i dont have a top)

thanks all!

TB

 

It gets cold in georgia?



It's easy to cut and re-flare the lines you have to fit your porportioning valve, almost any brake shop could do it.

 

most excellent... THANKS!

and yeah, relatively speaking... it gets cold...

any more of you fine folks have suggestions?

TB