1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Newbie question!!

Discussion in 'Flat Fender Tech' started by dezrik, Aug 16, 2008.

  1. Aug 16, 2008
    dezrik

    dezrik New Member

    Meeker, CO
    Joined:
    Jun 29, 2008
    Messages:
    13
    V6 swap in CJ2A Questions

    I've lost interest in my CJ5 and im looking at my cj2a for a Buick v6 swap, I was told it will bolt up to the T90 (in the cj2a) bellhousing without problems, Is this true? Would i be better off Swapping the CJ5 running gear into the cj2a?
     
    dezrik, Aug 16, 2008
    #1
  2. Aug 16, 2008
    Bill F

    Bill F Finally running

    Hillsboro NH
    Joined:
    Sep 22, 2002
    Messages:
    588
    It will need an adaptor and a longer input shaft for you t90 to work with it.
     
    Bill F, Aug 16, 2008
    #2
  3. Aug 17, 2008
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,470
    dezrik - I answered your PM before I read this. I thougth you had a 2a with a Dauntless already in it. If you need the full list of things, let me know and I will make you a full list.

    NOT a bolt in swap - motor mounts need changed, Adaptor and Long nose t90 like Bill said, I tweek my tranny location...
     
    Warloch, Aug 17, 2008
    #3
New Posts