1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

New Lug studs

Discussion in 'Early CJ5 and CJ6 Tech' started by Kaz, Jul 21, 2008.

  1. Jul 21, 2008
    Kaz

    Kaz Member

    Delaware
    Joined:
    Mar 24, 2008
    Messages:
    51
    When I replace my swaged studs for the ten inch brakes with regular ones that will allow easier access to the brakes, what size should I use? A search of the site tells me that I should use ones from a 1970 or later but I do not see any particular size mentioned. Krage has quite a few listed on his website. If anybody has already done this already and can tell me which studs to use it would be greatly appreciated.

    Thanks,

    Nick
     
    Kaz, Jul 21, 2008
    #1
  2. Jul 21, 2008
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    timgr, Jul 21, 2008
    #2
  3. Jul 21, 2008
    Kaz

    Kaz Member

    Delaware
    Joined:
    Mar 24, 2008
    Messages:
    51
    Kaz, Jul 21, 2008
    #3
  4. Jul 21, 2008
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    timgr, Jul 21, 2008
    #4
  5. Jul 21, 2008
    Vanguard

    Vanguard Take Off! Staff Member

    Vista, CA USA
    Joined:
    Aug 30, 2006
    Messages:
    2,260
    I think I recently provided the Dorman part number for the tapered axles. Do a search it should be easy to find. The part number listed worked for the 9" and 11" brakes, should work with 10"s as well. The one thing to consider is that these can only be swapped out once or twice before the hole in the hub becomes too large and they will no longer seat without spinning. DAMHIK.
     
    Vanguard, Jul 21, 2008
    #5
New Posts