1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

bantam springs re-worked

Discussion in 'Jeep Trailer Tech' started by jpflat2a, Jul 10, 2008.

  1. Jul 10, 2008
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    After installing the 33" tires on the Jeep, the Bantam looked low when connected behind the Jeep.
    The bantam has 31" tires, about 1" of clearance bewteen the tire and fender, and I'm not planning on changing them out anytime soon.
    So....I yanked the flat trailer springs out and had them re-arched, adding 2.5 inches to the arch.
    Re-installed the springs, and that gave me about 4" of lift, which now makes the trailer sit nice and level behind the Jeep.
    Also gives me some extra clearance for the water tank under the trailer.
     
    jpflat2a, Jul 10, 2008
    #1
  2. Jul 14, 2008
    jeepfreak81

    jeepfreak81 When in Doubt, Pedal out!

    Owosso, MI
    Joined:
    Jan 25, 2006
    Messages:
    690
    Nice! I am going to have to do the same thing to my M416, sits a little low behind the 2A.
     
    jeepfreak81, Jul 14, 2008
    #2
  3. Jul 14, 2008
    Chuck

    Chuck Sponsor

    Southshore Ma
    Joined:
    Sep 19, 2004
    Messages:
    1,463
    Looks good!
     
    Chuck, Jul 14, 2008
    #3
  4. Jul 14, 2008
    jayhawkclint

    jayhawkclint ΜΟΛΩΝ ΛΑΒΕ

    Oklahoma City, USA
    Joined:
    May 18, 2006
    Messages:
    2,622
    That is a sweet setup you've got there. I'd be interested in seeing a pic of the pair together, if you have any.
     
    jayhawkclint, Jul 14, 2008
    #4
  5. Jul 21, 2008
    jeep67

    jeep67 Member

    Shasta, Ca
    Joined:
    Dec 11, 2006
    Messages:
    205
    That is a sweet setup you've got there. I'd be interested in seeing a pic of the pair together, if you have any.

    x2
     
    jeep67, Jul 21, 2008
    #5
New Posts