1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Identify this wire (engine bay)

Discussion in 'Intermediate CJ-5/6/7/8' started by Sail78385, Jul 4, 2008.

  1. Jul 4, 2008
    Sail78385

    Sail78385 Custom CJ7 Build

    South Carolina
    Joined:
    Aug 16, 2007
    Messages:
    85
    Where would this clipped wire go?? To the coil perhaps?
     
    Sail78385, Jul 4, 2008
    #1
  2. Jul 4, 2008
    Sail78385

    Sail78385 Custom CJ7 Build

    South Carolina
    Joined:
    Aug 16, 2007
    Messages:
    85
    here is picture
     
    Sail78385, Jul 4, 2008
    #2
  3. Jul 5, 2008
    mike@IIM

    mike@IIM Member

    Washington Nj...
    Joined:
    Apr 18, 2005
    Messages:
    113
    Its just a single wire but so I could be wrong but it looks like the coil negative wire and or the tach wire if you have one. It goes back to the ignition module onder the drivers fender as well.
     
    mike@IIM, Jul 5, 2008
    #3
  4. Jul 13, 2008
    Boodie

    Boodie Boodie

    TOLEDO, OHIO
    Joined:
    Jul 4, 2006
    Messages:
    95
    I agree with mike: Tach Wire. That's what mine looks like on my 258 for my Tach. Also all my diagrams for the V8's show that wire as the Tach wire (green). I also see you have the famous multi-coloring Jeep wiring!!!

    Most people without a Tach just leave her hanging (tie her up out of the way)....now go buy yourself a Tach!!!

    :)
     
    Boodie, Jul 13, 2008
    #4
New Posts