1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Closed knuckle bearings?

Discussion in 'Early CJ5 and CJ6 Tech' started by jutgin, May 13, 2008.

Page 2 of 2
  1. May 22, 2008
    zed

    zed Iowa- Gateway to Nebraska

    central iowa
    Joined:
    Aug 4, 2004
    Messages:
    745
    Yeah THAT's the one I was talking about. I used both that one and the one from the FSM. Between both of them it's pretty clear.

    While I had them apart I also did the spindle bolt upgrade on Dr. Vern's site but it's not necessary to do that also.
     
    zed, May 22, 2008
    #21
  2. May 22, 2008
    jutgin

    jutgin New Member

    Joined:
    May 9, 2008
    Messages:
    28
    Well I have it all apart.That's all for today. Fragments of bearings everywhere.
     
    jutgin, May 22, 2008
    #22
  3. May 24, 2008
    jutgin

    jutgin New Member

    Joined:
    May 9, 2008
    Messages:
    28
    Well isnt there supposed to be 4 bolts in each cap? 1 for each hole?
     
    jutgin, May 24, 2008
    #23
  4. May 24, 2008
    lamar

    lamar Member

    greenville sc
    Joined:
    Jan 25, 2004
    Messages:
    327
    1 for each hole,4 per cap,8 per knuckle
     
    lamar, May 24, 2008
    #24
  5. May 25, 2008
    jutgin

    jutgin New Member

    Joined:
    May 9, 2008
    Messages:
    28
    I was wondering why the top cap was missing 2. I'll search for those bolts on one of those parts sites. Other than that it is done. wasn't that bad and thanks for all the help!
     
    jutgin, May 25, 2008
    #25
  6. May 26, 2008
    kaiser krawler

    kaiser krawler kaiser krawler

    naples florida
    Joined:
    Apr 19, 2007
    Messages:
    113
    take one of your old bolts down to the parts store a get some new ones, they are just 3/8 bolts. your local store should have some.
     
    kaiser krawler, May 26, 2008
    #26
Page 2 of 2
New Posts