1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

9" Wheel Cylinders for Brakes

Discussion in 'Early CJ5 and CJ6 Tech' started by 64Jeeper, Mar 21, 2008.

  1. Mar 21, 2008
    64Jeeper

    64Jeeper I have Brakes!

    Spring City, Pa.
    Joined:
    Mar 31, 2007
    Messages:
    97
    I found a new supplier for rear wheel cylinders if you are still using 9" brake assemblies.

    Check with your local golf course!! Yes, thats right. 1990's model Cushman utility carts use the exact same wheel cylinders. I know, because I'm using a set on my Jeep (and I work at a golf course). They are identical to the ones that were on my Jeep, right down to the casting number.

    Here are the Cushman part numbers:

    Wheel Cylinders: 886371 ::my local price: $12.08
    Repair Kit (for rebuilding them): 811775 ::my local price: $3.55

    These will only work on the rear axle.

    You could also check with your local Jacobsen dealer, because they carry Cushman parts.
     
    64Jeeper, Mar 21, 2008
    #1
  2. Mar 21, 2008
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    The early single master cylinder is also commonly used on forklifts. ;)
     
    w3srl, Mar 21, 2008
    #2
  3. Mar 21, 2008
    Brian P

    Brian P Member

    Clarkdale Arizona
    Joined:
    Nov 24, 2007
    Messages:
    650
    8) great find, made a note in my parts notebook :)
     
    Brian P, Mar 21, 2008
    #3
New Posts