1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

22re swap

Discussion in 'Flat Fender Tech' started by trawler Scott, Mar 17, 2008.

  1. Mar 17, 2008
    trawler Scott

    trawler Scott Member

    Joined:
    Jan 26, 2008
    Messages:
    99
    Any information on this going in my 46/52/53 CJ2-A /CJ-3A M38? engine is in a 86'4runner with a 5 speed,is the 5 speed to long ?I think I read I need the 4 spd ? any information would be nice.
    I really dont know what direction I am going but one may be to use my 4runner running gear and a toyota front solid axle.I would really like to go with a diesel but that will have to wait for a while.
    What kind of market is there for a great running L-head,trans(pops out of 2nd when decel)axles? how much could I expect to get for these items ? Just kind of a feeler right now so I can decide.
     
  2. Mar 17, 2008
    Andy4802

    Andy4802 Canadian Jeep junkie

    Hudson, Qc, Canada
    Joined:
    Jul 30, 2006
    Messages:
    410
    they guy i bought my hardtop from has an M38 with a yota 22re in it... i think then entire drivetrain is from a yota actually. here i stole a couple pics from his site. hope this helps!
     
    Last edited: Jun 10, 2008
  3. Mar 17, 2008
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    I do think length will be an issue. Not much room for a rear driveshaft. I was wodnering what the length would be for a 22re, yota 2WD tranny and a samurai Tcase.
     
  4. Mar 17, 2008
    trawler Scott

    trawler Scott Member

    Joined:
    Jan 26, 2008
    Messages:
    99
    Do you have a link to that Jeeps site ? It looks like he had to stick the grill out,not real crazy about that.
     
  5. Mar 17, 2008
    Andy4802

    Andy4802 Canadian Jeep junkie

    Hudson, Qc, Canada
    Joined:
    Jul 30, 2006
    Messages:
    410
  6. Mar 17, 2008
    trawler Scott

    trawler Scott Member

    Joined:
    Jan 26, 2008
    Messages:
    99
    Thanks ! thats pretty much what I am going for.
     
  7. Mar 18, 2008
    tbaker

    tbaker New Member

    Joined:
    Oct 22, 2007
    Messages:
    1
    I recognize that Jeep, it was built by a guy back in Newfoundland, he was selling it a couple years ago, those look the same pictures. It was bought by a Guy in Ottawa and shipped up I think. Check out this link for his for sale post back in 2006, it'll give you the specs. It is a cool looking rig.

    http://www.nova4x4.com/forum/topic.asp?TOPIC_ID=6949
     
  8. Mar 20, 2008
    trawler Scott

    trawler Scott Member

    Joined:
    Jan 26, 2008
    Messages:
    99
    Thanks ! I came in here to ask for specs and there they were :) I can buy a used set of boggers local for $350 probably 70% left 35 16 15's I love the look but I am worried about the ride and noise.I have had 42 and 39 TSL's and 44 ground hawgs,they were fine then but I am a little older now R)
     
  9. Mar 20, 2008
    Andy4802

    Andy4802 Canadian Jeep junkie

    Hudson, Qc, Canada
    Joined:
    Jul 30, 2006
    Messages:
    410
    yeah thats right. John bought it and shipped it from Newfoundland to Ottawa. i met him on a local forum and then i drove out to Ottawa and bought the hardtop from that same jeep from John. It's a wicked rig... really well put together.
     
  10. Mar 20, 2008
    trawler Scott

    trawler Scott Member

    Joined:
    Jan 26, 2008
    Messages:
    99
    my plans changed slightly to include a samurai frame.The 22re has been swapped into sammys quite a bit so I think everything should fit.We will see how close the body matchs the frame.
     
New Posts