1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T-98 conversion

Discussion in 'Early CJ5 and CJ6 Tech' started by caterpillarman, Feb 24, 2008.

  1. Feb 24, 2008
    caterpillarman

    caterpillarman New Member

    Joined:
    Dec 16, 2007
    Messages:
    26
    Hello, I am putting a T-98 in my 58 cj-5. I need to know what the thickness is for the crossmember spacers that drop the crossmember from the frame. the parts book says there is spacers, but does not give a thickness. thanks, Caterpillarman
     
    caterpillarman, Feb 24, 2008
    #1
  2. Feb 24, 2008
    windyhill

    windyhill Sponsor

    PA
    Joined:
    Nov 4, 2006
    Messages:
    1,502
    On my 67 ther three to a side at around 1/4" apeace. I used a peice of 1" x2" tubing when I did my t18 conversion on my 3b droping the cross member 1". Worked well.
     
    windyhill, Feb 24, 2008
    #2
  3. Feb 24, 2008
    jayhawkclint

    jayhawkclint ΜΟΛΩΝ ΛΑΒΕ

    Oklahoma City, USA
    Joined:
    May 18, 2006
    Messages:
    2,622
    Just like Windyhill said, 3 to a side, 1/4" thick:
    [​IMG]
     
    jayhawkclint, Feb 24, 2008
    #3
New Posts