my jeep sits crooked

Does any body have any suggestions to help me out. I have a 68 cj-5 that on the drivers side the channeling in between the tub and frame is rusted out and the jeep sits crooked. Do they make replacement channels for this or do i need to fab some spacers. Does anybody know the correct height of this channel or height of the spacer. I'm real close to getting this jeep back on the road and I need to get this issue resolved. Thanks for any feedback it will help. Keith

 

Check this website out, I found this one day at work they seem to have almost every bit of replacement steel either of us could need.
http://www.classicent.com/jeep.php
Hope this helps.
Eric

 

Thanks Eric I looked at that web site and i did find what they called lower floor supports. I will call them and see if they can help. So again thanks for the input. Any body have any backyard remidies like metal spacers or rubber gromets. Keith

 

That's your hat channels. Do a search, I found out how to replace mine by doing a search.. If it's bad enough you may want to do both sides.

 

Thanks alot those pics were great, you guys gave me some ideas to get me going. Keith