Today's project: more coolant flow

grannyscj · Sep 8, 2007

The bearings on Pete's water pump started growling, so while I'm looking for a good replacement pump, I found Flowkooler pumps were being sold by Quadratec.

FlowKooler water pumps solve low-speed overheating problems by doubling the water flow rate at low RPM & idle. At 3,500 RPM the flow rate returns to normal to prevent excess water flow at high speed. Independent testing has proven that FlowKooler water pumps produce 20% more gallons per minute at 2000 RPM and 100% more gallons per minute at 900 RPM than any other pump on the market today, including expensive racing pumps. FlowKooler pumps also generate 22% more water pressure inside the engine block than other water pumps. This increased pressure helps suppress engine hot spots, steam pockets, and pinging. In addition to higher output, the FlowKooler water pump is up to 32% more efficient than other pumps, meaning less horse power is required to turn it. The result is overall lower operating temperature by as much as 30 degrees when cruising at low speeds. All pumps are brand new (not rebuilt) and are covered by a lifetime warranty.
Click to expand...

Sounded good so I bought one. Here's a side by side of old vs new.:v6:
View attachment 19560

View attachment 19561

View attachment 19562

Log in or Sign up

Today's project: more coolant flow

grannyscj Headed to the Yukon

Log in or Sign up

Today's project: more coolant flow

grannyscj Headed to the Yukon

Useful Searches