1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Swap completed

Discussion in 'Builds and Fabricators Forum' started by clay, Aug 21, 2007.

  1. Aug 21, 2007
    clay

    clay Driving

    Hopkinton, MA
    Joined:
    Aug 14, 2005
    Messages:
    338
    Well I finished the sag swap and new bumper last week so I thought I would show the results. I know the bumper looks crooked but that is just the photo or my level?
     
    clay, Aug 21, 2007
    #1
  2. Aug 21, 2007
    bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,294
    Looks good...so did you use the original bumper,notch/bend/box, or is that a 1 off?
    Also any pics of the fab up for the saginaw installation?
    Jim S.
     
    bkd, Aug 21, 2007
    #2
  3. Aug 21, 2007
    clay

    clay Driving

    Hopkinton, MA
    Joined:
    Aug 14, 2005
    Messages:
    338
    For the bumper I had a local shop bend a 50" piece of 1/8' plate so it had a 4" front with 1 1/2 returns making a channel for $35.00 then I cut and fabbed the ends. I'll try to post more pics of the swap later when I have time.
     
    clay, Aug 21, 2007
    #3
  4. Aug 21, 2007
    Lieutenant Mike

    Lieutenant Mike Firefighter Mike

    Boaz AL
    Joined:
    Oct 4, 2005
    Messages:
    313
    Looks great.
     
    Lieutenant Mike, Aug 21, 2007
    #4
  5. Aug 21, 2007
    clay

    clay Driving

    Hopkinton, MA
    Joined:
    Aug 14, 2005
    Messages:
    338
    Here is a few more photos. I wish I would have taken more as I did it instead of at the end sorry.
     
    clay, Aug 21, 2007
    #5
New Posts