1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Engine mount

Discussion in 'Intermediate CJ-5/6/7/8' started by frenchy, Aug 11, 2007.

  1. Aug 11, 2007
    frenchy

    frenchy New Member

    Joined:
    Apr 10, 2007
    Messages:
    17
    Dropped the 360 in last night, but something seems not right.

    It seems as if the engine side bracket and the frame side bracket are at different angles ?
    And so the polyurethane motor mount in between is not fully squished in on both sides, the top of it hits both brackets, but the bottom is another 1/4 " or so away from the brackets.

    I have new engine and frame side brackets, as well as the motor mount in between. Am I missing another piece in here?
     
    Last edited: Aug 11, 2007
    frenchy, Aug 11, 2007
    #1
  2. Aug 11, 2007
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,526
    both sets of brackets are handed, left and right.
    you are using CJ brackets, correct ?
     
    jpflat2a, Aug 11, 2007
    #2
  3. Aug 11, 2007
    frenchy

    frenchy New Member

    Joined:
    Apr 10, 2007
    Messages:
    17
    Yup, CJ brackets, as far as I know...

    Driver side is smaller then passenger side frame mount, correct?
     
    frenchy, Aug 11, 2007
    #3
New Posts