1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

front brakes on dana 30

Discussion in 'Early CJ5 and CJ6 Tech' started by Spuds Klingin cj, Aug 10, 2007.

  1. Spuds Klingin cj

    Spuds Klingin cj New Member

    looking to put disc brakes on a dana 30 . I read about the dana 27 brake swap. did any one do a 30 ? If so any tips?
     
    Spuds Klingin cj, Aug 10, 2007
    #1
  2. jayhawkclint

    jayhawkclint ΜΟΛΩΝ ΛΑΒΕ

    Just did this. Piece of cake. I've actually done two ways now. Easiest way depends on your model year. I've done it to the 7/8" rotors, just swapped the whole knuckle/caliper/rotor/hub assembly from another D30 over.

    If you've got 6 bolt knuckles, you can use the Chevy setup listed in the tech section, you may have to swap out the inner bearings races, or you can find a set of discs off of a '77-'78 D30.

    HTH.
     
    jayhawkclint, Aug 11, 2007
    #2