1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

225 rad dimensions?

Discussion in 'Early CJ5 and CJ6 Tech' started by dauntless_powered, Aug 1, 2007.

  1. Aug 1, 2007
    dauntless_powered

    dauntless_powered SUB COB 2024 Sponsor

    Groton, CT
    Joined:
    Nov 3, 2003
    Messages:
    1,000,081
    anyone happen to know what the length from middle of mounting hole to middle of mounting hole was on a stock rad for the 225... the one i trashed is 23 1/2" from center of hole to center of hole. I just got one that came off a v6 with no problems that measures 18 1/2" from center to center.... do i have a non stock mount setup for a larger rad?
     
    dauntless_powered, Aug 1, 2007
    #1
  2. Aug 1, 2007
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    there were two different width V6 cores, one 17" and the other 22"
    sounds like you now have one of each
     
    Last edited: Aug 2, 2007
    jpflat2a, Aug 1, 2007
    #2
  3. Aug 1, 2007
    dauntless_powered

    dauntless_powered SUB COB 2024 Sponsor

    Groton, CT
    Joined:
    Nov 3, 2003
    Messages:
    1,000,081
    figures :mad:
    anyone need a "smaller" v6 rad in very good cond :oops:
     
    dauntless_powered, Aug 1, 2007
    #3
New Posts