1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Quick Help

Discussion in 'Early CJ5 and CJ6 Tech' started by Rmeak, Jun 25, 2007.

  1. Jun 25, 2007
    Rmeak

    Rmeak 2 mile hi member

    Leadville, Co
    Joined:
    May 14, 2007
    Messages:
    84
    Does anyone know the size of the nut that hold the t-case gear on the end of the mainshaft on the T90. I forgot to bring it with me this morning and I have a Monster Napa store by work that has a big selection of tools. any help would be appreciated. Bob
     
    Rmeak, Jun 25, 2007
    #1
  2. Jun 25, 2007
    66cj5

    66cj5 Jeep with no name

    NorthWest Indiana
    Joined:
    Sep 10, 2003
    Messages:
    2,084
    either 1 1/4 or 1 5/16" get both, then take the wrong 1 back.
     
    66cj5, Jun 25, 2007
    #2
  3. Jun 25, 2007
    Rmeak

    Rmeak 2 mile hi member

    Leadville, Co
    Joined:
    May 14, 2007
    Messages:
    84
    I know it is not 1-1/4 so maybe I will get a 1-5/16 and a 1-3/8 unless some else chimes in.
     
    Rmeak, Jun 25, 2007
    #3
New Posts