Best way to Plumb Dana 30 w/ Disc Brakes

I just purchased a Dana 30 front for my jeep. I already have converted my master cylinder to the firewall. I was wandering what would be the best way to run brake lines to my calipers? The holes are 7/16 x 20 into the calipers.

 

Hope some of this helps you out. The disks use a banjo fitting at the caliper. I converted mine from the banjo fitting to the AN fittings then made some braded SS lines. Then an adapter back to the brake line from the AN hose.

http://store.summitracing.com/partd...R-989543ERL&N=700+4294847273+115&autoview=sku

http://store.summitracing.com/partd...R-997634ERL&N=700+4294847273+115&autoview=sku

http://store.summitracing.com/partd...R-977504ERL&N=700+4294847273+115&autoview=sku

 

Thanks again, you are very helpful. That is how I will do it.

Thanks,

Bryan