1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Changing points in F-134

Discussion in 'Early CJ5 and CJ6 Tech' started by 58WillysCJ5, May 3, 2007.

  1. 58WillysCJ5

    58WillysCJ5 New Member

    Am attempting to change the points in my F-134 and was wondering if someone can suggest a simple way to remove the screw that faces the distributor wall. Can't get to it with a driver. Needle-nose pliers? sitss
     
    58WillysCJ5, May 3, 2007
    #1
  2. w3srl

    w3srl All-around swell dude Staff Member

    I've used both an offset screwdriver and a set of ignition wrenches on different distributors. If all else fails you can always remove the two screws that hold the breaker plate into the distributor body and then you can get to the screws with a regular screwdriver... ;)
     
    w3srl, May 3, 2007
    #2