1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

2a frame question

Discussion in 'Flat Fender Tech' started by junkfood, Apr 19, 2007.

  1. Apr 19, 2007
    junkfood

    junkfood Member

    Casa Grande,Az.
    Joined:
    Oct 23, 2005
    Messages:
    222
    Hello.
    I have a 2a I am trying to put back to original, or close anyway.. The problem is the front frame crossmember has been removed and a piece of angle iron welded in, for a V6 swap.. Is there anywhere I can find a replacement crossmember for this frame?

    Thanks
    Keith
     
    junkfood, Apr 19, 2007
    #1
  2. Apr 19, 2007
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525
    donor frame probably the only way
    one that's bent, rusted up, whatever the reason
    the bellcrank bracket and radiator tabs should be mounted to it as well
    of course, you could fab (or have made) up a real nice rectangular tube one instead
     
    jpflat2a, Apr 19, 2007
    #2
  3. Apr 20, 2007
    greencj5

    greencj5 Member

    So. California 91016
    Joined:
    Nov 14, 2004
    Messages:
    165
    Kieth,
    PM me and let me know what you need. I have a 2-A frame with the round cross member.
    Curt
     
    greencj5, Apr 20, 2007
    #3
New Posts