1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Can I pull my TC without removing my trans?

Discussion in 'Intermediate CJ-5/6/7/8' started by sac13, Mar 21, 2007.

  1. Mar 21, 2007
    sac13

    sac13 Come oooonnnnn summer....

    Shelby Township, MI
    Joined:
    Jun 12, 2006
    Messages:
    321
    I need to replace the rear bearing oil seal on my T-150. I pulled both out a couple months ago and boogered up my throwout bearing while re-installing the trans so I'm a bit scared to do it again. Is it possible to pull my Dana 20 out without removing the trans? I seem to remember a thread somewhere saying it's possible, but I don't remember for sure and I couldn't find it.

    Thanks!
     
    sac13, Mar 21, 2007
    #1
  2. Mar 21, 2007
    Chuck

    Chuck Sponsor

    Southshore Ma
    Joined:
    Sep 19, 2004
    Messages:
    1,463
    Yes, you will need to place a support under the clutch housing to support the tranny and engine.
     
    Chuck, Mar 21, 2007
    #2
  3. Mar 22, 2007
    CJ4U

    CJ4U Aint broke, ur not trying

    Vancouver, WA
    Joined:
    Jul 22, 2006
    Messages:
    121
    Yes, very simple. Just unbolt and seperate.
     
    CJ4U, Mar 22, 2007
    #3
New Posts