1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Flatty on a YJ frame

Discussion in 'Flat Fender Tech' started by junkfood, Jan 22, 2007.

  1. Jan 22, 2007
    junkfood

    junkfood Member

    Casa Grande,Az.
    Joined:
    Oct 23, 2005
    Messages:
    222
    Anyone done this? Is there any write ups I can check out to see what might be involved?
    Thanks
    Keith
     
    junkfood, Jan 22, 2007
    #1
  2. Jan 22, 2007
    jeepfreak81

    jeepfreak81 When in Doubt, Pedal out!

    Owosso, MI
    Joined:
    Jan 25, 2006
    Messages:
    690
    you would either need to lengthen the body, or shorten the frame at the very least if you don't want frame sticking out both ends.
     
    jeepfreak81, Jan 22, 2007
    #2
  3. Jan 22, 2007
    coby61

    coby61 Stupidiotic Member

    Prunedale CA
    Joined:
    Mar 10, 2004
    Messages:
    388
    coby61, Jan 22, 2007
    #3
  4. Jan 22, 2007
    cj-john

    cj-john Member

    Galveston, IN.
    Joined:
    Aug 9, 2006
    Messages:
    242
    Scroll down to the bottom of this page and read the thread about using a flatty on a 77CJ frame. Pretty much the same info will apply.
     
    cj-john, Jan 22, 2007
    #4
New Posts