1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

looking for 2&1/2 lift kit

Discussion in 'Flat Fender Tech' started by hotrod351, Jan 5, 2007.

  1. Jan 5, 2007
    hotrod351

    hotrod351 Member

    Joined:
    Sep 30, 2006
    Messages:
    225
    the owner of the 53 willys im working on wants to put a locker in the rearend and lift it. ive got rancho 2&1/2 inch front springs from my 55 M38A1 and going to measure to see if they will fit the front but im wondering, if they don't, where would be a good place to buy a complete kit, springs and shocks, for a old 53 CJ3A.
     
  2. Jan 5, 2007
    bondo303

    bondo303 New Member

    Long Island
    Joined:
    Dec 24, 2006
    Messages:
    1
    Just this week I got my Rancho kit for my 2A. I got the 1" springs. A guy in my club has an online store which is where I got mine from and got a pretty good deal. I got the springs, 4 RS 5000 shocks and H shackles from him. His website is http://www.cseoffroad.com.

    It is not listed in his website but he can get them.

    Send him an email with what you are looking for and ask for a quote. He also has a complete line of Omix as well. Hope that helps.

    -Bondo
     
  3. Jan 5, 2007
    jchisum

    jchisum New Member

    Cameron Park, CA
    Joined:
    Dec 29, 2004
    Messages:
    33
    i bought a rancho kit 2.5 front and back through a 4wd shop buddy from Rancho. go to Rancho's website and look up the number for CJ2-3B then order it through anybody who can order from rancho. Make sure you get the right numbers though as i had to send the cj5 springs back for exchange...
     
  4. Jan 6, 2007
    hotrod351

    hotrod351 Member

    Joined:
    Sep 30, 2006
    Messages:
    225
    i found out that checker can get the 2&1/2 rancho lift.
     
New Posts