1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Carb question, maybe some of you will have an idea.....

Discussion in 'Early CJ5 and CJ6 Tech' started by gopher_6_9, Dec 18, 2006.

  1. Dec 18, 2006
    gopher_6_9

    gopher_6_9 Member

    Lawrenceburg, tn
    Joined:
    Dec 17, 2006
    Messages:
    52
    Ok, I am new to the jeep world, though I have wanted one for awihle. I lucked up and found an Excellant '69 cj5 3.8L buick v6 3 speed that I traded for another off-road vehicle I had. newer motor and drivetrain is in great shape. I am a mechanic, but I have a question or two.

    1. I believe the card is a rochester 2G (says rochester gm 2 jet on it) and it idles good, but when you give it any gas it want to die out. My first thought was accelerater pump, but if you pump it 4 times or so in quick sucession it is fine, with the engine off you can hear/see it pump fuel as well, so that puts a little doubt in my mind, as well if you choke it 1/4-1/2 way it is fine as well, does that seem like an accellerator pump or not? also if I swap to an electric pump does the rochester need a regulater (8psi pump output)?

    2. What trans/transfer case/differentials should this thing have?
     
  2. Dec 18, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Did you check for vacuum leaks around the carb? It sounds more like an issue with that to me than accelerator pump or fuel pump. Especially when you choke it out, it does well. BTDT.

    The answer to your second question is in the Tech Section:
    http://earlycj5.com/TechIndex.shtml

    T14/D18/D27/D44
     
  3. Dec 18, 2006
    krawl

    krawl Peon Trainee

    Boise, Idaho
    Joined:
    Oct 19, 2006
    Messages:
    31
    I bet it is a vacuum leak as well. I just fixed a similar problem that ended up being a bad carb gasket where the PO just rtv'd the old broken gasket to the manifold and called it good. I found it by spraying a little carb cleaner around the base of the carb.
     
  4. Dec 18, 2006
    dauntless_powered

    dauntless_powered SUB COB 2024 Sponsor

    Groton, CT
    Joined:
    Nov 3, 2003
    Messages:
    1,000,081
    i would have to agree wiht vac leak as said...if that doesnt pan out carb rebuild kits are 20 bucks at napa for that carb (pn# 2-5478 )
     
  5. Dec 18, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    If I were a betting man, I'd bet that $20 that it is a vacuum leak. ;)
     
  6. Dec 18, 2006
    dauntless_powered

    dauntless_powered SUB COB 2024 Sponsor

    Groton, CT
    Joined:
    Nov 3, 2003
    Messages:
    1,000,081
    i love to bet, but i have to agree with ya on this one.....
     
  7. Dec 19, 2006
    gopher_6_9

    gopher_6_9 Member

    Lawrenceburg, tn
    Joined:
    Dec 17, 2006
    Messages:
    52
    hmmm, actually I didn't even think about a vacuum leak, will check that tonight, think I still have a can of brake clean at the shop, if not I will bring out the torch
     
  8. Dec 19, 2006
    gopher_6_9

    gopher_6_9 Member

    Lawrenceburg, tn
    Joined:
    Dec 17, 2006
    Messages:
    52
    Oh and thanks for the link to the tech section, thought I had looked at it and didn't find much, but that must have been another site.
     
  9. Dec 19, 2006
    jayhawkclint

    jayhawkclint ΜΟΛΩΝ ΛΑΒΕ

    Oklahoma City, USA
    Joined:
    May 18, 2006
    Messages:
    2,622
    Is it the original motor? I think they are 3.7, not 3.8. (225cid v. 231cid)
     
  10. Dec 19, 2006
    gopher_6_9

    gopher_6_9 Member

    Lawrenceburg, tn
    Joined:
    Dec 17, 2006
    Messages:
    52
    all original, I was told 3.8L but I have no idea so....
     
  11. Dec 19, 2006
    MCSCOTT

    MCSCOTT Member

    Columbia, Tn
    Joined:
    Apr 24, 2006
    Messages:
    905
    Umm.....You may have said brake clean by mistake, but you need to use carb cleaner to check instead of brake parts cleaner. From my experience with a certain fireworks display, brake parts cleaner doesn't burn :oops: , and you are wanting the leak to suck the carb cleaner in so that the engine will rev up to let you know there is a leak.
     
  12. Dec 19, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Carb cleaner will slow it down. Starting fluid will speed it up if there's a leak.
     
  13. Dec 20, 2006
    gopher_6_9

    gopher_6_9 Member

    Lawrenceburg, tn
    Joined:
    Dec 17, 2006
    Messages:
    52
    yeah depending on the type ofbrake clean used it can speed it up or slow it down. the stuff i use is just like starting fluid, in fact i have used it for that.

    mcscott you ever hit WITC? if so you ought to hit me up and take a look at the heap new years.
     
  14. Dec 20, 2006
    MCSCOTT

    MCSCOTT Member

    Columbia, Tn
    Joined:
    Apr 24, 2006
    Messages:
    905
    Yep, I'm at WITC pretty regularly. We were going to only ride there on Monday of New Years this year because we were going to ride at Wooly's on Saturday, but now it looks like we will be at WITC on Sunday and Monday. Like I have mentioned before, I don't have a trail rig anymore, and wont have until next year, but since I'm vice pres of our club somebody always finds a seat for me, so just look for the bunch with something like my avatar on their rig, and I'll be around somewhere.

    What does your Jeep look like so that I'll know what to look for, or have you already posted pics somewhere that I missed?
     
  15. Dec 20, 2006
    gopher_6_9

    gopher_6_9 Member

    Lawrenceburg, tn
    Joined:
    Dec 17, 2006
    Messages:
    52
    Nah I haven't posted pictures yet, will probably do that tomorrow. For now it is ugly spray painted gloss black with transport yellow showing through(not by me), but this summer it will look alot differant. I won't be doing much this year with no cage in it, and the fact that I rolled an '82 'yota on memorial day weekend and had a good buddies wife get trapped between the rollbar and a tree and had to winch it off her..... no more half finished cages with people riding in the bed. Period.
     
New Posts