1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Roll Bar

Discussion in 'Early CJ5 and CJ6 Tech' started by Hellsfyer, Dec 12, 2006.

  1. Dec 12, 2006
    Hellsfyer

    Hellsfyer New to Old Jeeps

    Gooding, IDAHO
    Joined:
    Oct 30, 2006
    Messages:
    30
    Will a roll bar (with front tie in) from a late 40's early 50's Willey fit in a 1970 CJ5? I just didn't know if it was woth stripping the hard top on mine and even attempting to drop it in, without checking with the masses first.R)

    Thanks.
     
    Hellsfyer, Dec 12, 2006
    #1
  2. Dec 12, 2006
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    If it's a biscuit fender Willys, and it's not a stretched wheelbase, it'll fit. If it has flat fenders, I don't think so.
     
    timgr, Dec 12, 2006
    #2
  3. Dec 12, 2006
    Hellsfyer

    Hellsfyer New to Old Jeeps

    Gooding, IDAHO
    Joined:
    Oct 30, 2006
    Messages:
    30
    Well, it is a flat fender...so that settels it.
     
    Hellsfyer, Dec 12, 2006
    #3
  4. Dec 12, 2006
    jd7

    jd7 Sponsor

    Nacogdoches,Texas
    Joined:
    Mar 30, 2004
    Messages:
    1,745
    The flatty is a little more narrow but I have used them, with a little creative postioning.
     
    jd7, Dec 12, 2006
    #4
New Posts