1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

4 cyl hydraulic clutch?

Discussion in 'Early CJ5 and CJ6 Tech' started by captain cj, Dec 9, 2006.

  1. Dec 9, 2006
    captain cj

    captain cj Member

    Crystal Beach...
    Joined:
    Sep 27, 2005
    Messages:
    331
    A friend of mine saw my hydraulic clutch set up and thought he would do it on his jeep so he bought the slave and the master and now he is stuck he thought he would just copy my bracket but I have a 225 and he has a four. Big difference, anyone do this on their four cyl better yet have any pics of the bracket for the slave cyl? I kinda feel bad now that he bought all the stuff so i thought I would try and help out.
    Thanks Steve
     
    captain cj, Dec 9, 2006
    #1
  2. Dec 9, 2006
    Hawkes

    Hawkes Member

    Nova scotia
    Joined:
    Jun 18, 2003
    Messages:
    490
    Did he buy a push or pull slave? I'm thinking it would work with a pull type and a homemade bracket.

    Paul
     
    Hawkes, Dec 9, 2006
    #2
  3. Dec 9, 2006
    captain cj

    captain cj Member

    Crystal Beach...
    Joined:
    Sep 27, 2005
    Messages:
    331
    Its a pull type . The problem is the slave wont line up directly behind the opening for the clutch fork due to the two large bumps on the side of the t-90. I was wondering if someone had done this how they overcame this problem?
     
    captain cj, Dec 9, 2006
    #3
New Posts