1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

ross steering bushing replace

Discussion in 'Early CJ5 and CJ6 Tech' started by ktm25089, Dec 4, 2006.

  1. Dec 4, 2006
    ktm25089

    ktm25089 Member

    Joined:
    Oct 18, 2006
    Messages:
    240
    hi again,
    just to ask,i just receive a rebuilt kit from krage for my ross box.i want to replace the bushings.there is a inner and outer.easy to replace the inner.but the outer how?hit it to get out and then hit again the new?its copper asnd i dont want to make damage.heat it??and i know that its easy to get it off.how to fit the new one?

    thanks
    george
     
    ktm25089, Dec 4, 2006
    #1
  2. Dec 4, 2006
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    I had to press mine and ream to fit......HTH
     
    blevisay, Dec 4, 2006
    #2
  3. Dec 4, 2006
    ktm25089

    ktm25089 Member

    Joined:
    Oct 18, 2006
    Messages:
    240
    so,i have to buy a reamer?
    for the press?hand pressing?with wood and hammer?
     
    ktm25089, Dec 4, 2006
    #3
  4. Dec 5, 2006
    Rondog

    Rondog just hangin' out

    Parker, CO
    Joined:
    Aug 25, 2005
    Messages:
    2,918
    Just take it to a machine shop. They can do it all, it'll be cheaper and less aggravating in the long run. You DON'T want to buy a reamer! $$$$
     
    Rondog, Dec 5, 2006
    #4
New Posts