windshield parts?

I need a windshield for my 54' m38a1. This guy owes me money and has some windshields to sell so were going to trade. This is the price list he sent me. I have no idea how to decifer it. What do I need all I want is the bare minimum. I have the lower hingses. Please Help! Jacob
FRAME windshield BARE
150.00
X
HINGE UPR LEFT
40.00

HINGE UPR RIGHT
40.00

HOOD REST LEFT
15.00

HOOD REST RIGHT
15.00

CLAMP TO DASH LEFT
15.00

CLAMP TO DASH RIGHT
15.00

DOOR CHANNEL LEFT mil type top
10.00

DOOR CHANNEL RIGHT mil type top
10.00

TOP ROD BRACKET LEFT mil type top
10.00

TOP ROD BRACKET RIGHT mil type top
10.00

FOOTMAN LOOP for hold down strap
5.00

LATCH hood lock upright
25.00

COWL SEAL
40.00

GLASS stock 2 piece type (2 ea.)
130.00

GLASS cj 1 piece type
150.00

GLASS RUBBER 2 piece glass
80.00

GLASS RUBBER 1 piece glass
45.00

WIPER KITS 2 ea. arm and blade IMPORTS
80.00

 

if you have lower hinges that bolt to the cowl, then at the bare minimum you would need, in my opinion:
w/s frame-bare
both upper hinges- to mount frame to lower hinges
clamps- to hold to dash
that gets you the basic frame without everything else listed
clear as mud ?

 

Those upper w/s hinges don't go bad. If you can find an old frame that has them, and you don't care what happens to the frame, then a cutoff wheel and some cursing will get you two for free?

They are about 10 inches long and are inserted up into the windshield frame and bolted in. They can be tough to get out because of years of rust and corruption, but if you don't care about saving the frame, then it gets easier.

If you end up doing this, try to get a picture of what the upper hinge looks like so that you won't accidently cut a piece of it off.

It is sorta like an iceberg. Only 10% of the upper hinge actually shows....

 

Thanks for your help...I appreciate it. Jacob