1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

clutch pivot ball adjustment

Discussion in 'Early CJ5 and CJ6 Tech' started by ktm25089, Nov 21, 2006.

  1. Nov 21, 2006
    ktm25089

    ktm25089 Member

    Joined:
    Oct 18, 2006
    Messages:
    240
    hello,
    i have replaced my pivot ball.but before take out the old i didnt measure it.not i dont know how deep to screw the new????
    anyone out there knows??
    thanks
     
    ktm25089, Nov 21, 2006
    #1
  2. Nov 21, 2006
    AKCJ

    AKCJ Active Member

    Fairbanks, Alaska
    Joined:
    Aug 12, 2003
    Messages:
    1,036
    V6?

    I screwed mine in until it bottomed out, however, I think there's more than one design on this so that may not work for you.

    I recommend reading the clutch info on the Novak web site. It describes the (critical) relationship of the angle of the clutch fork and movement of the disc/throwout bearing.
     
    AKCJ, Nov 21, 2006
    #2
New Posts