1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

New Wheels

Discussion in 'Early CJ5 and CJ6 Tech' started by booger, Oct 23, 2006.

  1. Oct 23, 2006
    booger

    booger New Member

    Thomaston, GA
    Joined:
    Oct 17, 2006
    Messages:
    26
    Posted this by mistake on "introductions" - sorry for that. Trying to find out if any of you know of any problems with putting 17x8 inch wheels on a 1970 CJ5 - plan to use all terrain tires. Any suggestions?
     
  2. Oct 23, 2006
    Budd

    Budd New Member

    Joined:
    Oct 23, 2006
    Messages:
    7
    What size tires? What backspacing? Stock width axles?

    Not enough info..........
     
  3. Oct 23, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Can't think of any problems. Tire size will dictate alot of the problems. The wheel size shouldn't be an issue though. Only 1" bigger than stock was at times and 8" wheels with the right backspacing tuck nicely.
     
  4. Oct 23, 2006
    booger

    booger New Member

    Thomaston, GA
    Joined:
    Oct 17, 2006
    Messages:
    26
    Any suggestion on tire size? All this 4-wheel and Jeep stuff is totally new to me. Just want the Jeep to look right and not have tires stickin out all sides of the thing!!
     
  5. Oct 23, 2006
    booger

    booger New Member

    Thomaston, GA
    Joined:
    Oct 17, 2006
    Messages:
    26
    I was asking for suggestions on tire size so no answer there. Don't know the backspacing and believe the axles to be stock - just bought it last week and no very little about Jeeps! A DANGEROUS SITUATION ARISING HERE!
     
  6. Oct 23, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Why 17" wheels?
     
  7. Oct 23, 2006
    Desert Runner

    Desert Runner Member 2024 Sponsor 2022 Sponsor

    Hickory, Pa
    Joined:
    Sep 11, 2005
    Messages:
    819
    Well, do you really want to drive something like this.???? [​IMG]
     
  8. Oct 23, 2006
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    The only drawback I can think of would be the cost of the tires. 17" tires are usually pretty $pendy...
     
  9. Oct 24, 2006
    booger

    booger New Member

    Thomaston, GA
    Joined:
    Oct 17, 2006
    Messages:
    26
    Happens that the wheels I like I can only get in 17-inch. May cancel that order and try to find something I can live with in 15 or 16. Don't like the thought of high dollar tires on a recurring basis.
    THANKS ALL OF YOU. THE FORUM WORKS!!
     
  10. Oct 24, 2006
    grannyscj

    grannyscj Headed to the Yukon

    Anchorage, AK
    Joined:
    Dec 19, 2005
    Messages:
    1,758
    Tire size anywhere from 28" (stock) to 31" w/ no lift, to 33" w/ 2.5/3" lift (can probably stuff 35s but I'm told you'll rub). Backspacing 2.75" is close to perfect, but most 8" wide wheels will be 3.5"-4.0" which is OK w/ tires 10.5" wide or less (any wider and you'll have to adjust the turn stops reducing your turning radius). Spacers can be added if they rub inside and to help w/ turning radius. IMO increasing wheel size reduces the amount of sidewall and therefore sidewall flex. This makes for a rough ride in an already rough riding vehicle and limits your offroad capabilities.:v6:
     
  11. Oct 24, 2006
    booger

    booger New Member

    Thomaston, GA
    Joined:
    Oct 17, 2006
    Messages:
    26
    Ok, ya'll have pretty much talked me out of 17 inchers - not going for the "gangsta" look at all. Just gonna keep looking and see what I run across. YA'LL SAVED ME A BUNCH OF MONEY!! THANKS, Booger
     
New Posts