1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Starter or Flywheel

Discussion in 'Flat Fender Tech' started by NoFlyZone, Oct 22, 2006.

  1. Oct 22, 2006
    NoFlyZone

    NoFlyZone Member

    Ridgeville, SC
    Joined:
    Mar 17, 2006
    Messages:
    578
    Which is more likely with your experience? It was noisy before this time it just spins. Have I lost the teeth off one of them or did something give up in my starter? I'll pullthe starter and check it out sometime this week.

    There is a 12 volt key start type on ebay for $169 maybe I should just switch to one of those anyway.
     
    NoFlyZone, Oct 22, 2006
    #1
  2. Oct 22, 2006
    michigan_pinstripes

    michigan_pinstripes I'm not lost, I'm wandering

    Clarkston MI...
    Joined:
    Aug 20, 2003
    Messages:
    605
    Flywheel ring teeth. Easy fix, pain to get there as in pull the trans and everything else attached. Should be a couple threads around here somewhere when I did mine. Remove flywheel --hammer and punch ring off -- then flywheel in freezer; new ring gear in oven at 200* drops right on loosely until temp equalizes and voila!

    I still run a 6v starter with no issues using 12v. IMO Leave it.
     
    michigan_pinstripes, Oct 22, 2006
    #2
  3. Oct 23, 2006
    NoFlyZone

    NoFlyZone Member

    Ridgeville, SC
    Joined:
    Mar 17, 2006
    Messages:
    578
    I just happened to find that thread when I did a search on frozen pizza.
     
    NoFlyZone, Oct 23, 2006
    #3
New Posts