CJ-2A turn signals wiring

Hey everyone,

I'm trying to wire up the turn signals on my 48 2A. It has (I believe original) a SignalStat turn-signal arm bolted onto the steering column.

Does anyone know how these are wired up? There are a few wires comming out of the turn-signal arm box.. I'm not quite sure what does what.

I picked up a flasher relay from an autoparts store with the hopes of just being able to wire it in and have turn signals..... but I have a feeling there might be more to it.... usually is.

Thanks,
Evan

 

I've been wondering the same.

I've got a Spartan model flasher assembly from a ECJ5. Are any diodes or something required to keep power from feeding back through the brake light circuit? As far as I can tell mine were directly wired into the brake light. Wouldn't that cause problems when the brakes are on and the signal is on too?

 

one of many that come up if you use search function
"turn signal wiring"
the turn signal switch cancels out the brake light to answer your question

http://earlycj5.com/forums/showthread.php?t=30675&highlight=turn+signal+wiring