1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

trifecta of axle shafts

Discussion in 'Flat Fender Tech' started by godevil, Sep 20, 2006.

  1. Sep 20, 2006
    godevil

    godevil My Humor isnt appreciated

    Mt Pleasant SC
    Joined:
    Aug 17, 2005
    Messages:
    329
    Well in two Dana 25's I have the whole family represented.
    If you ever wondered what the different joints looked like side by side......[​IMG]
    One of the 25's had locking hubs.The ends of the shafts were threaded with a nut,is this right?
    Seems like they might have used hubs from another application? I was going to use them as spares but I wonder now..
    Anyway its always something isn't it?
    [​IMG]
    Donnie
     
    godevil, Sep 20, 2006
    #1
  2. Sep 20, 2006
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,471
    The threaded one is an original - we would have to cut them off to put selectable hubs on (hours with a hacksaw as a kid). I have seen several that way that just had drive flanges on them (splined for 4X4 smooth for 2X4).
     
    Warloch, Sep 20, 2006
    #2
  3. Sep 20, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Oooh, good stuff for the picture bank.

    Can I use it there?
     
    sparky, Sep 20, 2006
    #3
  4. Sep 20, 2006
    Vanguard

    Vanguard Take Off! Staff Member

    Vista, CA USA
    Joined:
    Aug 30, 2006
    Messages:
    2,259
    Is it from top to bottom:

    Spicer

    Bendix

    Rzeppa?
     
    Vanguard, Sep 20, 2006
    #4
  5. Sep 20, 2006
    mb82

    mb82 I feel great!

    Charlottesville Va
    Joined:
    Mar 17, 2003
    Messages:
    2,706
    Hmm I remember finding a spicer and a Rzeppa when I took apart my 25, IIRC I still have the shafts somewhere. Maybe it is time to clean off to workbench and see if they are there.
     
    mb82, Sep 20, 2006
    #5
  6. Sep 20, 2006
    godevil

    godevil My Humor isnt appreciated

    Mt Pleasant SC
    Joined:
    Aug 17, 2005
    Messages:
    329
    Sure Sparky no problem.
    The threaded shafts were the ones with the locking hubs?
    Well now I am in the market for a short spicer shaft.
     
    godevil, Sep 20, 2006
    #6
New Posts