1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

I must be missing something.

Discussion in 'Flat Fender Tech' started by godevil, Sep 7, 2006.

  1. Sep 7, 2006
    godevil

    godevil My Humor isnt appreciated

    Mt Pleasant SC
    Joined:
    Aug 17, 2005
    Messages:
    329
    Correct me if I am wrong.
    On a tapered 44 rear axle,If I remove the bolts holding the brake backing plate the axle shaft and hub should slide out as one unit? Mine will not.
    Probably too tired to be working on this thing ,my brain feels 2 quarts low.....
     
    godevil, Sep 7, 2006
    #1
  2. Sep 7, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Yup. BTDT.
     
    sparky, Sep 7, 2006
    #2
  3. Sep 7, 2006
    godevil

    godevil My Humor isnt appreciated

    Mt Pleasant SC
    Joined:
    Aug 17, 2005
    Messages:
    329
    BTDT as in the axles should come out OR been so tired that I can hear my eyeballs rotate in their sockets?
     
    godevil, Sep 7, 2006
    #3
  4. Sep 7, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Both.
     
    sparky, Sep 7, 2006
    #4
  5. Sep 7, 2006
    godevil

    godevil My Humor isnt appreciated

    Mt Pleasant SC
    Joined:
    Aug 17, 2005
    Messages:
    329
    Well they don't.
    Boogered up splines?
    Bigger Hammer?
    Tomorrows project now.:rofl:
     
    godevil, Sep 7, 2006
    #5
  6. Sep 7, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Slide hammer on the end of the axle?
     
    sparky, Sep 7, 2006
    #6
  7. Sep 7, 2006
    48cj2a

    48cj2a http://bantamt3c.com

    Central Illinois
    Joined:
    May 4, 2003
    Messages:
    526
    48cj2a, Sep 7, 2006
    #7
New Posts