1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Swapping Body

Discussion in 'Early CJ5 and CJ6 Tech' started by JEREMYJEEP, Aug 27, 2006.

  1. Aug 27, 2006
    JEREMYJEEP

    JEREMYJEEP New Member

    Texas
    Joined:
    Jul 16, 2006
    Messages:
    34
    Can you put a cj5 body on a cj3 frame? I have a cj3 frame and it has cj5 body.
     
  2. Aug 27, 2006
    solomon

    solomon Baby Jeep Junkie

    South MS
    Joined:
    Jul 19, 2006
    Messages:
    255
    Then I guess you can.
     
  3. Aug 27, 2006
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    The '3 has an 80" WB, vs. the '5s 81"
     
  4. Aug 27, 2006
    mb82

    mb82 I feel great!

    Charlottesville Va
    Joined:
    Mar 17, 2003
    Messages:
    2,706
    I don't believe you can. the Flattie frame is too short by about an inch IIRC.
     
  5. Aug 27, 2006
    kamel

    kamel Senior Curmudgeon

    Erlanger, Kentucky
    Joined:
    Jun 10, 2003
    Messages:
    891
    unless something has been done about it, you should have an overhang of the body in the rear.
     
  6. Aug 27, 2006
    JEREMYJEEP

    JEREMYJEEP New Member

    Texas
    Joined:
    Jul 16, 2006
    Messages:
    34
    It has cross tube in front that steering mounts to. Did that come on cj5?It also has u-bolt style spring hangers. I want a lift but not sure what lift is best.
     
  7. Aug 27, 2006
    Sledgehammer

    Sledgehammer Sure, I'll try it

    Ellery, Il
    Joined:
    Jun 7, 2006
    Messages:
    341
    We put a CJ2A body on a 69' CJ5 frame. The 2A mounting bolts went right into the factory mounting holes on the 5 frame despite the 5 frame being 81" vs 80" on the 2A. We couldn't beleive it. I know it isn't exactly what you asked but I think it should help a little.
     
New Posts