1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dana 20 T-Case Question

Discussion in 'Intermediate CJ-5/6/7/8' started by greencj5, Aug 26, 2006.

  1. Aug 26, 2006
    greencj5

    greencj5 Member

    So. California 91016
    Joined:
    Nov 14, 2004
    Messages:
    165
    Help! I need to seperate a D20 from the T-15 transmission. How are they connected internally? Do they have a nut like the D18 or do they slip apart after removing the 5 bolts that hold the two cases together? My FSM's are to old to show a D20.

    TIA:beer:
     
    greencj5, Aug 26, 2006
    #1
  2. Aug 26, 2006
    hudsonhawk

    hudsonhawk Well-Known Member

    North Texas...
    Joined:
    Feb 4, 2005
    Messages:
    1,939
    Remove the bolts on he case and they just slide apart. The bull gear on the back of the tranny is inside the t-case. It is a tight fit to get it through the opening but it will come apart.
     
    hudsonhawk, Aug 26, 2006
    #2
  3. Aug 27, 2006
    CJ4U

    CJ4U Aint broke, ur not trying

    Vancouver, WA
    Joined:
    Jul 22, 2006
    Messages:
    121
    Just take the bolts out and it'll come apart. Depending on how they were sealed together (The gasket maker stuff bonds them together) it may take a little pressure, but is not connected by anything inside.
     
    CJ4U, Aug 27, 2006
    #3
  4. Aug 27, 2006
    greencj5

    greencj5 Member

    So. California 91016
    Joined:
    Nov 14, 2004
    Messages:
    165
    It sounds like no suprises await. Thanks for the insight.
     
    greencj5, Aug 27, 2006
    #4
New Posts