1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Where doth the petroleum flee to?

Discussion in 'Early CJ5 and CJ6 Tech' started by sparky, Aug 12, 2006.

Page 3 of 3
  1. Aug 21, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Replacement for item #2 is laying on the table in the back room. Once I finish up the wiring I'll replace that too. We'll see then where we are.
     
    sparky, Aug 21, 2006
    #41
  2. Sep 3, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Seems it was the oil pressure line. Wheeled it all day yesterday and didn't loose any oil. :)
     
    sparky, Sep 3, 2006
    #42
  3. Sep 3, 2006
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,378
    Good deal! :)
     
    Glenn, Sep 3, 2006
    #43
  4. Sep 4, 2006
    Mark Mann

    Mark Mann Kermit

    Huntsville, AL
    Joined:
    Jan 8, 2003
    Messages:
    140
    Good to know- I'll keep a close eye on that too.... Good luck!

    MM :flag:
     
    Mark Mann, Sep 4, 2006
    #44
  5. Sep 4, 2006
    A Mandery

    A Mandery Member

    Indianapolis,...
    Joined:
    Dec 2, 2003
    Messages:
    138
    I seem to recall that you have had the front cover on and off a few times lately. Still using rope seal or converted to rubber? I have had the front seal leak like that. No oil on the floor but mists out while going down the road.
     
    A Mandery, Sep 4, 2006
    #45
  6. Sep 4, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    It's neither here nor there since I've fixed the leak, but I've put a neoprene seal in.

    Like I said, the oil line fixed it. I knew it was bad. Just not THAT bad.
     
    sparky, Sep 4, 2006
    #46
Page 3 of 3
New Posts