1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Cage Kit

Discussion in 'Early CJ5 and CJ6 Tech' started by Txjake, Jul 18, 2006.

  1. Jul 18, 2006
    Txjake

    Txjake I wrenched with Sparky

    Oklahoma City OK
    Joined:
    Feb 3, 2006
    Messages:
    544
    Where is a good place to start looking for a weld-in or bolt-in cage kit for an ECJ5?
     
    Txjake, Jul 18, 2006
    #1
  2. Jul 18, 2006
    willysnut

    willysnut Banned

    Newnan, Ga.
    Joined:
    Oct 8, 2003
    Messages:
    654
    I think Quadratec or 4wd.com have one.
     
    willysnut, Jul 18, 2006
    #2
  3. Jul 19, 2006
    Hansh

    Hansh Going Mobile

    SE Wisconsin
    Joined:
    Dec 7, 2004
    Messages:
    425
    This place makes a weld in kit. http://www.jl4wd.com/ The kit I bought was for a CJ7, so I shortened the tubes between the front and rear hoops. Their kit is a front hoop and two spreader bars. I had the other two spreader bars and side tubes fabbed at a local shop and I welded them in. I have a newer style windshield.

    You could also go to any local race car fab shop and have them bend up what you want.
     
    Hansh, Jul 19, 2006
    #3
  4. Jul 19, 2006
    panzer

    panzer Super Mod Staff Member

    Columbus, OH
    Joined:
    Dec 9, 2003
    Messages:
    1,245
    panzer, Jul 19, 2006
    #4
New Posts