Vacuum Wiper lines

I just cleaned and relubed my vacuum wiper motors and they work fine. Now I want to run new vacuum lines to them but I am not sure how the lines are configured since we tossed them out during the restoration. I know there are 2 connections on the fuel pump - one vac and the other pressure. I have 2 questions
1) Does the vacuum for the wipers come from only from the fuel pump and not the engine intake?
2) Where does the pressure line on the fuel pump go to?
Eddy

 

I had just finished the same thing a few weeks ago, go to the homepage and look under the F-134 guide to engine rebuilding and you will find out.
Hope this helps.
http://www.earlycj5.com/tech/engines/index.shtml#fortysix

 

Excellent link above, for an explanation.

A short answer is that the engine vacuum passes "through" the vacuum pump. This supplements the engine vacuum at open throttle, etc. The "pressure" side of the pump is plumbed to manifold vacuum.

Pete

 

Thanks for the leads, been on vacation and just getting round to reading the advice.
Thanks.
Eddy

 

Cool, glad it helped. This site has proven to be a very invaluable tool.