1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Coolant hose routing F134 hurricane

Discussion in 'Early CJ5 and CJ6 Tech' started by Thunderpig, May 9, 2006.

  1. May 9, 2006
    Thunderpig

    Thunderpig Member

    Parachute, Colorado
    Joined:
    Mar 28, 2006
    Messages:
    259
    I did a search to the archives on this topic and found a thread on the subject... but it looks like it's all related to a different engine to me.

    Does any one have a diagram or a picture of correct hose routing on the F134 hurricane :hurrican: ? with or without heater. :?

    :hurrican:

    Thanks

    Jim
     
    Thunderpig, May 9, 2006
    #1
  2. May 9, 2006
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,381
    One hose goes from the water pump fitting on the passenger side to the heater, other hose goes from top of head in the back to the other fitting on the heater.
     
    Glenn, May 9, 2006
    #2
  3. May 9, 2006
    Steamer

    Steamer Thick and gritty!

    SW OR
    Joined:
    Oct 17, 2004
    Messages:
    389
    What Glenn said. My 61 was this way until I gave up on the heater after it gave up on me. We don't speak anymore.
     
    Steamer, May 9, 2006
    #3
  4. May 9, 2006
    Thunderpig

    Thunderpig Member

    Parachute, Colorado
    Joined:
    Mar 28, 2006
    Messages:
    259
    So... can you plug all of the ports on the engine if you don't have a heater installed?

    Any one have pics?

    My camera is broke otherwise I'd post my set up for critique!
     
    Thunderpig, May 9, 2006
    #4
  5. May 9, 2006
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525
    yes, you can plug the ports if no heater
    I would keep the 90* bypass hose.
     
    jpflat2a, May 9, 2006
    #5
  6. May 9, 2006
    Rondog

    Rondog just hangin' out

    Parker, CO
    Joined:
    Aug 25, 2005
    Messages:
    2,918
    The fitting on the rear of the head usually had a valve to shut off the water flow to the heater in the summer, didn't it?
     
    Rondog, May 9, 2006
    #6
  7. May 9, 2006
    Thunderpig

    Thunderpig Member

    Parachute, Colorado
    Joined:
    Mar 28, 2006
    Messages:
    259
    Mine does have a valve to close it off on the rear passenger side of the engine (top). So that's what it's for!R)
     
    Thunderpig, May 9, 2006
    #7
New Posts