1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

PTO winch

Discussion in 'Intermediate CJ-5/6/7/8' started by Soilsman, May 7, 2006.

  1. May 7, 2006
    Soilsman

    Soilsman New Member

    Tri Cities...
    Joined:
    May 7, 2006
    Messages:
    9
    I have a 1974 cj-5 with a ramsey 8000 lb pto winch. I am looking for parts for this winch. I have contacted ramsey and they sold all of thier PTO winch stuff to a Well drilling outfit. Anyone with NOS info on these winches I would greatly appreciate it. I believe these also came on some Rover vehicles and some toyota vehicles.
     
    Soilsman, May 7, 2006
    #1
  2. May 7, 2006
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,126

    ???

    Are you sure about that?

    Ramsey still lists PTO winches on thier web site but they're in the "Industrial" section-

    http://www.ramseywinch.com/industrial/winches.html

    They still produce basicly the same winch as what you have, the model 400 (under "Mechanical") & parts are available. According to thier web page the closest repair center to you is-

    Berens Associates
    124 Hegenberger Loop
    Oakland, California 94621
    510-633-1050

    If you can sneak over the border you could also try-

    Drive Products, Inc.
    19150-96th Ave, Unit 1
    Vancouver, British Columbia V4N 3R3
    604-888-4464
    800-473-1717
    FX: 604-888-2029

    I have a write up on rebuilding my Ramsey here-

    http://users.eastlink.ca/~howarde/Ramsey Winch_2.html

    H.
     
    Howard Eisenhauer, May 7, 2006
    #2
  3. May 7, 2006
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    only parts pics I have
    may not be same model
     
    jpflat2a, May 7, 2006
    #3
New Posts