Bearing cap to steering knuckle torque specs?

Looking for torque specs for the bearing cap to steering knuckle on a D-25? Thanks in advance for your help.

 

I found the steering arm to knuckle specs at 55-65 so the cap should be in the same ball park.

 

Hmmm, a quick look through the FSM didn't give up that info. (Your original question....)

 

I went to about 20lbs and called it good
It felt about right R)

I'll be watching to see if anyone knows, cuz I've only done one side so far.

 

This is from the '72 manual:


I'd expect the settings for the 30 to be close ('72 Wagoneer had a closed-knuckle 30).

 

i believe i have my 27a at about 30-35 but i found it in my fsm.
then used blue locktite
i'm in tucson this week so i can't look it up