1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Looking for VIN, Data plate missing

Discussion in 'Early CJ5 and CJ6 Tech' started by 53m38a1, Feb 20, 2006.

  1. Feb 20, 2006
    53m38a1

    53m38a1 New Member

    Charleston, SC
    Joined:
    Feb 8, 2006
    Messages:
    31
    I'm sure there are past discussions on this, but my search was not succesful. The data plate was missing when I bought my 53 M38 A1, and I would like to trace my jeep. I know that there is supposed to be numbers on the frame or axel somewhere, but have not had a lot of luck finding them. Can someone give me some specific areas to look for identifying numbers? Thanks.
     
    53m38a1, Feb 20, 2006
    #1
  2. Feb 20, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    sparky, Feb 20, 2006
    #2
  3. Feb 20, 2006
    gte636p

    gte636p Member

    smyrna, Ga
    Joined:
    Sep 23, 2002
    Messages:
    492
    it's been a while since i looked at my a1, and it's a bit of a drive to look at it now, but there should be a plate on the rear fender well behind the passenger seat, stamped on the frame, i believe one on the cowl under the hood, and i think the number would be listed on any rebuilds performed on parts (tranmission, engine, etc).

    like i said, it's been a good bit since i've laid hands on this project, buti remember seeing identification number on all of thoe spots; or at least i think i remember seeing them there.
     
    gte636p, Feb 20, 2006
    #3
  4. Feb 21, 2006
    godevil

    godevil My Humor isnt appreciated

    Mt Pleasant SC
    Joined:
    Aug 17, 2005
    Messages:
    329
    How did you know it was a 53'? (this is a loaded question be careful)
     
    godevil, Feb 21, 2006
    #4
New Posts