1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

frame repair?

Discussion in 'Intermediate CJ-5/6/7/8' started by wsg, Feb 4, 2006.

  1. Feb 4, 2006
    wsg

    wsg Member

    Hartselle, Alabama
    Joined:
    Nov 21, 2005
    Messages:
    90
    Just curious of some of the methods of frame repair. I had a recent issue with my tow bar falling down while i was driving on the road..OUCH!!..:rofl: Talk about surprised while driving.

    Cracks are just behind the front spring hangers on my 76.

    Bent the front frame "horns" (is that the term?) upward only slightly. Thinking just take it to a frame shop and get them to straighten it then i can do some welding.

    Id searched some and looks like plates are a plus on the frame around this??

    Is this somthing better explained with pics?

    Just looking for some thoughts on repairs.
     
    wsg, Feb 4, 2006
    #1
  2. Feb 5, 2006
    jeepbandit

    jeepbandit New Member

    Ellsworth, N.H.
    Joined:
    Apr 28, 2005
    Messages:
    49
    Boxing the frame horns if they ar'nt already would help alot.
     
    jeepbandit, Feb 5, 2006
    #2
  3. Feb 5, 2006
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,197
    Hard to tell how extensive your damage is...sounds like moreso than the cracks that I had.

    I went with the basic "grind and weld" repair, and we'll see what happens.

    http://www.boyink.com/supersizedutch_comments/707_0_9_0_C/

    My gut feeling is that this is a place where going overboard is easy...and doing things like boxing sections or adding plates has to be approached carefully or you can induce more cracks (frame designed to flex, stiffen one section, the rest keeps flexing, leading to new cracks).
     
    Boyink, Feb 5, 2006
    #3
  4. Feb 5, 2006
    wminmi

    wminmi Overgrown child at Work

    South Haven,...
    Joined:
    Jan 2, 2006
    Messages:
    137
    i welded all the cracks then used "C" channel over the entire frame horn section. Prolly overkill, but shouldn't break/crack anymore R)
     
    wminmi, Feb 5, 2006
    #4
  5. Feb 5, 2006
    wsg

    wsg Member

    Hartselle, Alabama
    Joined:
    Nov 21, 2005
    Messages:
    90
    thanks guys
     
    wsg, Feb 5, 2006
    #5
New Posts