1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

JEEP Panel Stencil Size

Discussion in 'Early CJ5 and CJ6 Tech' started by Facquet66cj5, Feb 1, 2006.

  1. Feb 1, 2006
    Facquet66cj5

    Facquet66cj5 66cjfive

    New York
    Joined:
    Feb 12, 2005
    Messages:
    35
    I have a new steel cj5 body with no jeep stamps. Fortunately, I found a pack of Kaiser stencils. What is the correct size (length and width) or the Jeep on the side panel?
     
    Facquet66cj5, Feb 1, 2006
    #1
  2. Feb 1, 2006
    Facquet66cj5

    Facquet66cj5 66cjfive

    New York
    Joined:
    Feb 12, 2005
    Messages:
    35
    Last edited: Mar 5, 2007
    Facquet66cj5, Feb 1, 2006
    #2
  3. Feb 1, 2006
    hardknox00001

    hardknox00001 Sponsor

    Liberty, Tennessee
    Joined:
    Jan 31, 2006
    Messages:
    72
    Hey, I remember these stencils going through ebay a few months ago. ;)

    Anyway, measuring off of mine, I come up with 1.5" tall by 4.5" long. Of course this is close but not precise, as the stamped letters are not squarely stamped out, they are rounded. Hope that helps :) .
     
    hardknox00001, Feb 1, 2006
    #3
  4. Feb 1, 2006
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,128
    I saved the ones offa Maggie, they're a little rusty but useable. If you want them the're yours, a little cutting, a little welding & you got the real thing :).

    H.
     
    Howard Eisenhauer, Feb 1, 2006
    #4
  5. Feb 1, 2006
    Facquet66cj5

    Facquet66cj5 66cjfive

    New York
    Joined:
    Feb 12, 2005
    Messages:
    35
    Yes, I did buy them on ebay. My jeep is in the process of being painted, so I will have them spray them on.
     
    Facquet66cj5, Feb 1, 2006
    #5
  6. Feb 1, 2006
    TigerShark

    TigerShark Sponsor

    St. Louis, MO
    Joined:
    May 27, 2004
    Messages:
    333
    Howard, if he isn't interested in the cutoff ones, I am.

    Jim
     
    TigerShark, Feb 1, 2006
    #6
New Posts